2.26.2017

CITY PROGRESS PHOTOS

A few images of the current status of the city.  I still have a few more LED-lit cars to add, and need to straighten some light poles (Wow! Its amazing how the camera can reveal the slightest angle) and lot's of details!

Above is the street that will parallel the passenger station tracks (it has a name! Its called the "Avenue of the Liberation of Quinntopia"! See my map here)...below is the area in front of the Metro Station...
 Another shot of the area that will eventually be next to the main passenger terminal.
The below photo should provide a pretty good idea of the layout.  Right now the City is sort of an island surrounded by wood, which will eventually be the tracks.
I still need to add more detail, but I'm pleased with how the Metro Station turned out. I still need to add a decoder to the second Tokyo Subway train so that trains will operate automatically in both directions/
An overhead view of "Minitrix Avenue" on the back side of the Metro Station and the recently completed "Gorham Building".
And finally, a street level view under the Metro Viaduct on "Kato Avenue"...

2.19.2017

GORHAM BUILDING COMPLETE

gorham building 1
Hello modellers!

Wow, it's been awhile since my last post. I've been busy!  I'll have a few more updates shortly.

I've been adding my buildings to the layout and arranging them, which also means putting together a few kits that have been sitting around.

I purchased CMR's Gorham Building several years ago (based on this actual building) and I decided to finally put it together. It's the ideal size for a certain spot, and decided it was time to get it on the layout!  Below is the plat where this new/old building will be installed.
The CMR kit is made of an interesting material.  It's a laser-cut sort of styrene or plastic. I actually really enjoyed putting it together. And while the pieces are all flat plastic, once complete they look really nice.

The instructions advise you to paint the structure after assembly, but as I wanted to use different shades of grey for the different layers, I sprayed them all beforehand and then glued after they were painted.


Interior detail was primarily limited the large ground floor entrance/lobby area.

I really like how this building turned out. in addition to lighting, I applied several coats of washes to really draw out the laser cut details that CMR puts on the pieces.
 More updates to follow! Thanks for reading!